Integration: Fabman for 3D printers

Hello all,

I would like to share with you small write up about our Fabman integration for 3D printers.

Here you can see video (with :uk: subtitles) which we made for our members, which explain how to work with this integration.

If you have any question, don´t hesitate to ask :slight_smile: .

I hope this will be interesting for you.

Miroslav from FabLab Brno :czech_republic:


Wow, your integration really has come a long way! :clap:
Thank you for sharing this.

@roland is currently experimenting with integrating Fabman into Octoprint. We’ll let you know how it goes.